Inside Banner

Stainless Steel Alloy 15-5 PH Bar

Specialist supplier of stainless steel 15-5 PH round bar. It can be supplied in a range of sizes and finishes with varying tolerances. Cold-finished stainless steel bar is usually supplied to meet the international standards of ASTM A276/A484 or A582/A484M.

Stainless Steel Alloy 15-5 PH Bar is a molybdenum-bearing austenitic stainless steel with greatly increased resistance to chemical attack as compared to the conventional chromium-nickel austenitic stainless steels such as Alloy 304. In addition, Stainless Steel Alloy 15-5 PH Bar offers higher creep, stress-to-rupture, and tensile strength at elevated temperatures than conventional stainless steels. It is a low carbon or "L" grade which provides resistance to sensitization during welding and other thermal processes.

Alloy 15-5 PH Bar is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 – 1500°F (427 – 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low temperature toughness. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000oF (537°C). In most instances, the carbon content of the plate enables dual certification.

Applications

  • Aerospace – piston engine manifolds
  • Chemical Processing
  • Expansion Joints
  • Food Processing – equipment and storage
  • Petroleum Refining – polythionic acid service
  • Waste Treatment – thermal oxidizers

Benefits

  • Higher creep stress and rupture properties when compared with 304
  • Ideal for high temperature service
  • Overcomes sensitization and intergranular corrosion concerns
  • Can be used in elevated temperature applications for ASME Boiler and Pressure Vessel Code applications
  • Due to stabilisation the material offers better overall corrosion resistance when compared to 304/304L
  • Excellent mechanical properties

Chemical Composition

Grade C Mn Si P S Cr MO Ni CU
Alloy 15-5 PH Min - - - - - 12.0 - - -
max 0.15 1.00 1.00 0.04 0.03 14.0 - - -

Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) Brinell (HB)
Alloy 15-5 PH 95,000 50,000 25 - 175

Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion
(mm/m/°C)
Thermal Conductivity
(W/m.K)
Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nW.m)
Alloy 15-5 PH 0-100°C 0-315°C 0-538°C at 100°C at 500°C
-7750 200 10.4 11.0 11.4 23.9 26.0 460 600

Calico Metal Ind Pvt Ltd exports their products to countries like UAE, Bahrain, Italy, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria, Kuwait, Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan & Saudi Arabia.

Stainless Steel & Special Alloys Materials