Inside Banner

Monel K500 Sheet

Monel DIN 2.4360 / 2.4375 Hot Rolled Sheet, K500 Monel Alloy Chequered Sheet, Monel K500 Perforated Sheets Supplier.

Calico Metal Ind Pvt Ltd leading Monel K500 ASTM B127 Sheet manufacturers. We pride ourselves on being at the forefront of innovation in both product lines and after sales services. This is why we will constantly upgrade our products and services to meet market expectations and demands. We are reputed as an excellent quality Monel K500 ASTM B127 Plates,supplier in the industry.

As with alloy 400, Monel K500 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures. Monel K500 has a chemical composition of:

  • Nickel 63%
  • Copper 28-34%
  • Carbon .3% max
  • Manganese 2% max
  • Iron 2.5% max
  • Silicon 0.5 max
  • Sulfur 0.025-0.060%

Monel K500 is very similar to Monel 400®except for its greater sulfur content. Monel K500 also has the same corrosion resistance and physical properties as the Monel K500 with a slightly different range of mechanical properties. Monel K500 was developed for good machinability.

Characteristics

  • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
  • Excellent resistance to high velocity sea water
  • Resistant to a sour-gas environment
  • Excellent mechanical properties from sub-zero temperatures up to about 480C
  • Non-magnetic alloy

Applications

  • Sour-gas service applications
  • Oil and gas production safety lifts and valves
  • Oil-well tools and instruments like drill collars
  • Oil well industry
  • Doctor blades and scrapers
  • Chains, cables, springs, valve trim, fasteners for marine service
  • Pump shafts and impellers in marine service

Specifications

  • Dimensions : ASTM, ASME and API
  • Specifications : ASTM / ASME SB 163 / 165
  • Grade : Monel K500 (UNS N05500)
  • Size : 15"NB TO 150"NB IN

Chemical Composition

Grade Ni Fe C Mn Si Cu Al Ti S
K500 63.0 min 05 - 2 0.25 max 1.5 max 0.5 max 27.0 - 33.0 2.3 - 3.15 0.35 - 0.85 0.010 max

Physical Properties

Density (Kg.m-1) 84.3
Magnetic Permeability (20°C) <1.005
Curie Temperature (°C) -90
Young’s Modulus (N/mm2) 179 x 103
Specific Heat, 20°C (J.Kg-1.°K-1) 418
Specific Electrical Resistance, 20°C (?O.m) 0.62
Thermal conductivity,20°C (W.m-1.°K-1) 17.5
Mean coefficient of thermal expansion, 20-100°C (°K-1) 13.4 x 10-6

Mechanical Properties

Grade Tensile (ksi) .2% Yield (ksi) Elongation % Hardness (HRb)
K500 Psi – 1,60,000 , MPa – 1100 Psi – 1,15,000 , MPa – 790 20 % -

Fabrication and Heat Treatment

The machinability of MONEL K500 is difficult as it work-hardens during machining. The conventional machining techniques used on iron alloys may be used for this alloy. Welding methods including gas-arc welding, metal-arc welding, gas-metal-arc welding and submerged-arc welding are recommended on this alloy. Cold working may be done using soft die materials for better finishing.

Calico Metal Ind Pvt Ltd Monel K500 alloy to countries like UAE, Bahrain, Italy, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria, Kuwait, Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan & Saudi Arabia.

HASTELLOY, HAYNES and C-22 are registered trade names of Haynes International, Inc., MONEL & INCONEL are registered trade names of INCO family of companies., NITRONIC is a registered trade name of Armco Inc., CARPENTER & 20Cb-3 are registered trade names of Carpenter Technology Corporation., FERRALIUM is a registered trade name of Langley Alloys, LTD.

Nickel Alloys Materials